I have finally found time to update my last two product review posts.  Keep in mind that I am by no means an expert.  Just a guy that had some extra money and was in the right place at the right time to get a good deal on these parts.  I also happened to know a number knowledgeable people who recommended these to me.

Burris Fullfield 2
http://darthbader.wordpress.com/2007/10/11/burris-fullfield-2-3x-9x-40mm/

Volquartsen 10/22 Action Trigger Kit
http://darthbader.wordpress.com/2007/10/11/volquartsen-1022-action-trigger-kit/

I recently purchased the Burris Fullfield 2 scope for my 10/22 and I also picked up Burris’ Zee rings.  Since I’m still relatively new to the world of firearms I decided to let a friend of mine install it.  He’s been shooting, reloading, and working on his guns for 30 or 40 years.  I’m glad I made that choice after seeing the steps he went through to make sure it was zeroed in properly.

The scope and the rings look fantastic on my 10/22, which has the silver painted action and stainless steel barrel (Wal-mart model I think).  We also had no problems mounting on the Ruger provided base; I had heard in the past that this could be problematic.

When we got the gun to the range I had trouble getting it zeroed in properly so my friend had to take over.  I wasn’t too upset though it was the first time I had shot a gun in 10 months.  He had it setup in no time and I was holding pretty tight groups (for me) at 50 yards.  Obviously my friend was holding extremely tight groups at that distance.

I would definitely recommend this scope if you’re in the market for one.

I bought this kit back in August of ‘07 and didn’t finish installing it until May ‘08.  It wasn’t a difficult installation, I just kept getting side-tracked.  Regardless, I will say that I like how my 10/22 shoots now.

The trigger was smooth and reasonably light without any adjustments after installation.  Also the recoil was noticeably improved; which I assume is the result of the replacement buffer provided with the kit.  At the range I put a couple hundred rounds of varying brands through the gun and I was pleased with the results.

These kits aren’t cheap but if you shoot a lot and are already in the market for one I’m sure that’s of little concern.  Unfortunately I don’t recall how much I spent on it.

I’ve been considering this for a while now and tonight I went through and deleted the posts which involve my profession.  However I did copy those posts to a different blog.  The reason I came to this decision was to separate work and play.  Later this month I am moving to a city that is known for being predominantly liberal.  Sadly, because of that, I have a slight fear that my firearm posts could adversely affect my career.  I’m still a Life Member in the NRA and will be shooting regularly.  I will continue posting on here as well.

My upcoming move is for a new job that I accepted a couple of weeks back.  While starting a new job is exciting I will be losing my firearm discounts and that is sad.  However, I am still waiting on my 1911 and that is very exciting.

Recently I went shooting with a friend of mine from work.  He claims to be surgical with his 1911 so I figured I’d let him put a couple of mags through my 9mm.  If you recall I thought the gun was shooting low but after he had a few minutes with it he thought is was shooting a little high.  I have a feeling he is right, I was shooting off the bench that day and was hitting the target at 25 yards with little trouble.  It doesn’t hold a tight group which is a bit concerning but I doubt I’ll get it looked at.   My current plan is to just get used to the gun and not worry about it’s quirks.  I’m still waiting for my 1911 after all, if that has problems then I’ll be upset.

I recently received my XD; I got the bi-tone model in 9mm.  This is the first polymer handgun I’ve owned and I’m pleased so far.  I was surprised how easy it was to disassemble the gun for cleaning.  I suppose I should have expected this but I didn’t.

Shooting this gun was a pleasure.  Even though it’s a 9mm and the recoil is fairly light for that round the XD absorbs it nicely.  With a proper grip it was easy to get the gun back on target for the next shot.  The first 100 rounds I shot with it were CCI Blazer.  I don’t have any complaints with them but I wasn’t overly impressed either.  While at the range I shot from 25 yards, 15 yards and 10 yards.  I couldn’t hit anything from 25 yards, from 15 yards I could hit the paper and from 10 yards I was hitting the target.  At first I thought the gun was shooting low, I’m hoping that I was just pulling down before I squeezed the trigger.  I have no intention of getting the gun checked out just yet.  I’ll put another few hundred round down range before then.

In the end I really like the XD, I would like to get a 40 or a 45 at some point as well.

I recently found out that I could have shot a 50 cal. and the ammo would have been free.  I was unaware of this when I had the chance and chose to attend a family dinner instead.  Now I’m not wishing I hadn’t spent time with my family but I could easily have rearranged my schedule to have gone to the shoot before dinner.  You live and learn I guess!

The rifle is now sitting in the office of one my my employer’s managers and it taunts me everyday.

One day it and I shall meet and fun will be had!

I realized recently that I haven’t posted on this blog in a while.  When I decided to focus this blog on firearms I thought I’d be motivated to post more often on that topic.  That hasn’t been the case, probably because I haven’t been shooting in a while.  I suppose I should remedy that soon.  Unfortunately, I don’t have a ton of extra money right now, especially with those two handguns getting ready to hit my account any day now.  I have a few boxes of ammo so I can plink some but I will probably spread that out over a few months.  I’ll be going on vacation in a few weeks so maybe that will spur some off-topic posts, we’ll see.

When I started this blog I had intended it to be a place for me to share things I learned about software with the public.  Over the life of the blog it has turned into a place for me to share my gun knowledge as it grows.  I’ve been tossing around the idea of separating each of my top level categories into separate blogs.  Most likely this will remain my firearms oriented blog, I may change the title of it though. I’m hoping that this change will focus my writing more and help me post more than once or twice a month.

I haven’t taken the time to start this reorganization yet but I’ll update this blog accordingly if I do.

Thanks for reading!

Finally, my company said I can order some below-list-price pistols with their connections. So I plan on getting an XD and a 1911 from Springfield Armory. I’m not sure what exactly I’ll get but for the XD I’m looking at a 4in 9mm. I’ll keep this blog up-to-date on what I decide.

Update: It’s been about a week now and I’ve finally filled out my order. I’ve decided to get a Bi-tone Service model 9mm XD and a loaded, Parkerized 1911 with night sights. I got a pretty good deal but I’ll still be living on a pretty tight budget for the foreseeable future.